Contech-lighting STPL Manuel d'utilisateur télécharger pdf (Page 1)

INSTALLATION PROCEDURES

• Position Trim Insert, Trim Plate and LED Module together as shown (Fig. 1)

• Using the (4) small Philips head screws (included), insert screws into the back of the LED Module securing all components together. (Fig. 1)

• For exterior applications, place the black gasket (provided) into position as shown (Fig. 2).

• Connect the supply leads from the electrical outlet box to the ﬁxture wire leads using wire nuts (not provided). ALWAYS CONNECT WHITE

TO WHITE AND BLACK TO BLACK. (Fig. 2)

• Position Steplight module into J-box while carefully tucking excess wire out of the way.

• Attach Steplight module to J-box using (2) large outlet box screws. NOTE: Extra screws are provided, including optional Hex Head screws for

vandal resistant applications.

• Note orientation of trim plate for proper installation (especially in wet locations) and to ensure proper cutoff.

IMPORTANT SAFETY INSTRUCTIONS:

• Read all the instructions before installation. Save instructions for later use.

• Turn off power at fuse or circuit breaker box before installation or before doing any maintenance work.

• Product must be grounded to avoid potential electric shock and any other potential hazards.

• Product must be mounted in locations and at heights and in a manner consistent with its intended use, and in compliance with National

Electrical Code and local codes. Use of accessory equipment is not recommended.

• Installing contrary to instructions may cause unsafe conditions.

• Do not block light from the trim aperture, in whole or in part, as this may cause unsafe conditions.

• Warning: Risk of ﬁre. Most dwellings built before 1985 have supply wire rated at 60°C. Consult a qualiﬁed electrician before installation.

• To avoid hazards to children, account for all parts and properly dispose of all packing materials.

• Call the Technical Support department at Con-Tech Lighting with any installation questions: 847.559.5500.

STPL INST

For Con-Tech Lighting 2W LED Accent Steplight: STPL Series

www.con-techlighting.com

All speciﬁcations subject to change without notice.

1-847-559-5500 This document can be recycled.

Small Philips

Head Screws

Large Outlet

Box Screws

Black Gasket

Plugs

Outdoor

Junction

Box

Trim Insert

Trim Plate

LED Module

INSTALLATION PROCEDURES 1

Résumé du contenu

Page 1 - INSTALLATION PROCEDURES

INSTALLATION PROCEDURES• Position Trim Insert, Trim Plate and LED Module together as shown (Fig. 1)• Using the (4) small Philips head screws (included

Commentaires sur ces manuels

Pas de commentaire

Contech-lighting STPL Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Contech-lighting STPL. ConTech Lighting STPL User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Contech-lighting STPL Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Contech-lighting STPL. ConTech Lighting STPL User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Contech-lighting STPL